fi-8170 arm stl file v.8
maxwaxpax · 3 days, 8 hours ago
Free
The image is 10X the normal size. When you are going to print, reduce the image to 1/10 or 10%. The v3 has been updated to fix a potential issue with the piece sticking to the plastic tab in the enclosure on the fi-8170. This fix works best with sleeved cards. You will need a pushpin or something similar to feed through the hole to keep this in place. Remove both original "feeder arms". Make sure to save them and save the springs. You will use one of the springs for this print. Insert the new printed piece and use the push pin to anchor it. Close it up, and you are good to go.
fi-8170 arm v8.stl
30.4 KB
15 downloads